Small Title

"Flora" Tub Wagon (2)

Frames Frames

I cut frames from basewood and joined them with PVA and panel pins after pre-drilling. Instead of trying to cut mortice type joints, I formed the horizontal sections from two strips, with one strip cut as necessary to provide recesses to hold the uprights. The side section uprights are held in the outer strip, whilst for the end section uprights it is the inner, with the outer strip forming the buffer beam.

I used white primer then Volkswagen Brilliant Orange aerosol spray to finish the frames.

On to Flora Tub Wagon (3)
Back to Flora Tub Wagon (1)

Return to Main Home Page

The photographs and text on this page are copyright (c) Paul Backhouse 2004 and may not be reproduced or distributed without the owner's permission.